So rear Trumk Alignment... new seal and Tail Light Mod...


Mark

Recommended Posts

  • Admin

I needed to align the rear trunk slightly to get it to seal better and stop leaking the old seal had a pinch is all so I replaced it centered the trunk which wasnt so fun what a pain in the ass lots of patience is all I say...Like freaking headers...

So anyhow I used to do this with tape then I bough them cut the way I liked I think you will agree...

I was doing this since the 80s by the way... 🙂

My Idea First...

 

Trunk Alignment.JPG

left side.JPG

Trunk Alignment.JPG

Car from Back .jpg

Here I go Again...

ezgiFlag-resize.gif

 Mark@AmericanJeeper.us

Link to comment
Share on other sites

  • Admin

Notice in the picture above... how its electrical Tape inside the lens is all...:)

Now I like this look a lot better cleaner...and all...

Plus I added the Tint for the windows...

The Old School Louvers and the Old School Traction bars...

and they reduce wheel spin and hope down to 1/3rd Your car basically will squat and bolt out of the hole...

 

 

 

TA TA Night 2.JPG

TA TA Night.JPG

Gold Bird Gas door.jpg

IMAG0049.jpg

IMAG0463.jpg

IMAG0599.jpg

Limo.JPG

Louvers 2.JPG

Louvers and Rims.JPG

Spacers to level Traction Bars.JPG

Traction Bars adjusted.JPG

Traction Bars.JPG

Here I go Again...

ezgiFlag-resize.gif

 Mark@AmericanJeeper.us

Link to comment
Share on other sites